July 17, 2020

What Items Are Checked in A Car Inspection|3 Killer Tips to Pass

What Items Are Checked in A Car Inspection
82 / 100

It is necessary that you inspect your car every now and then to be able to guarantee its smooth and proper functioning all the while. Moreover, many states and jurisdictions demand that the cars be inspected every quite often, the failure to which you may land in hot soup as a car owner.but do you know What Items Are Checked in A Car Inspection?Don’t fret! Hang with us.

But just what is a car inspection? What does a typical car inspection entail? How can you see to it that you pass a car inspection? Well, the answers to these questions may only be obtained by digging deeper into the subject matter. That forms the basis of our explanations and discussions hereunder.

What does a car inspection mean?

car detailing business

A car inspection is a procedure of scanning the components of the cars to determine whether they are in the best shades and forms. This procedure is typically carried out in a garage where there are the necessary pieces of equipment and trained personnel for the job.

Though each car owner is at liberty to determine when and where the inspection may be conducted, some states and jurisdictions require that it be carried out at set intervals and in some designated spots. The car inspection is also mandatory before the used cars are licensed or titled.

What Items Are Checked in A Car Inspection

In a typical state car inspection, the following parts and components are looked into:


The brakes are scanned for any worn-out and damaged components like the brake lines, brake pads, drums, and calipers, to name but a few!

Driver’s Seat and Restraints

Seats, and restraints must be properly and securely anchored to the supports where they are attached. Moreover, they also have to be in great condition all the while.

Exhaust System

It is the exhaust system that channels out the waste emissions. A good exhaust system has to be in a proper functioning state and be able to channel out the exhaust without defects.

Floor Pan

During this inspection, the floor of the car is scanned for any holes that may allow for the exhaust gases to seep in and interfere with the room occupants and are sealed off completely.

Fuel System

The fuel system is the nerve of the vehicle in the sense that it is the one that supplies the fuel to the moving parts and components of the system. Needless to say, it has to be in a proper working condition.

Lights and Turns Signals

The lighting mechanisms of the car see to it that you are able to behold your path and where you are headed to smoothly. They have to operate at the optimal level and be in good shape all the while.

Mirrors, Windows, and Glass

Mirrors, windows, and the glass are never to be left out either. They too have to be in great shape all the time. That can only happen if they are patched for any breakages.

Steering and Suspension

Vehicles are mounted on suspensions while the steering wheel is what turns the vehicles to the left and right. It hence goes that these two components have to be tuned and tightened to make them operate at capacity.

Vehicle and Driver Information

It is also important that the information regarding the vehicle and the driver be looked into and updated if need be. These include the registration, title, and proof of insurance.

Wheels and Tires

Finally, the wheels and the tires too need to be looked into in order that they are maintained in the correct shades and forms all the while. The wheels, needless to say, have to be structurally sound and properly aligned.


The chassis is the main part of a typical vehicle. It is the one that houses the interior components like the seats and the dashboard. Being clearly visible, the chassis has to be devoid of any damages and other ugly marks that may imperil its beauty and proper functioning.


It is the transmission that transfers the torque from the engine to the wheels. The transmission has to be properly functional to avoid any mishaps that may arise in the course of moving from one part of town to another.

How to pass a car inspection

It is mandatory that your car passes the car inspection. That is the only way you may retain your licensure to use the state and interstate highways. But how do you ensure that your car passes an inspection? The three easy steps below will help you do just that:

1.Confirm the car inspection requirements

Different states, cities, counties, and jurisdictions have varying requirements for the passage of the inspection exercise. You want to familiarize yourself with the one that matters in your area. That is why the first step to take is to countercheck with the Department of Motor Vehicle in your area for the necessary checklist.

2. Fix simple issues and carry out a visual check

Next, fix some simple routine issues like changing broken mirrors, altering the engine oils, and sealing cracks. These will not only save your time but also go a long way in reducing the overall cost of inspection thereafter.

3. Bring in a mechanic for preliminary inspection

Lastly, bring in a trained and professional mechanic for preliminary car inspection. Let the mechanic make a checklist of the likely issues that may cause trouble during the full-scale inspection. It is this checklist that you will rely on to know where to channel your inspection efforts.


Car inspections are ordinarily complicated tasks yet still very important. You can never hence treat this exercise shoddily as you may land in unnecessary trouble thereafter. By far the best way to guarantee a great outcome is to put your house completely in order. That can only happen if you carry out a preliminary checkup.

You are certainly not the only one who is in need of these services in your area. There are many others around you who want to know how to prepare for a car inspection. Why not help them by sharing this piece of information with them?

Return to Home

Leave a Reply

Your email address will not be published. Required fields are marked *